The CB series is designed to give unsurpassed performance in catch basins and storm sewers when a Sewer Combination Cleaning/Vacuuming Machine is not required. The CB series is ideal for all municipal vacuum applications.
Usage & Benefits
The CB Series is for contractors, municipalities, and industrial site use where a jetting hose is not required. Ideal for catch basin cleaning and vacuuming of semi-dry material.
Cost-effective, one-man catch basin cleaning.
Positive displacement exhauster. Operating capacity of 5250 CFM (4587.3M3) and a 204″ (5181.6mm) water column. Includes a PolyChain belt drive, muffler silencer with clean out, and two vacuum relief valves. Is protected by filter/centrifugal separator.
Single lever control. Can dump at a 45° angle Includes a heavy-duty double acting cylinder and a self-aligning closure seal.
TRIPLEX RECIPROCATING WATER PUMP
0-35 GPM capacity and 0-2000 PSI rating.
POWER TAKE OFF (PTO)
Split shaft PTO, Hydrostatic drive, or Auxiliary Engine.
Top mounted boom assembly with 360° motorized boom rotation. Internal air vac valve includes a 1/2″ side-mounted hose. 4-1/2′ (1.4M) boom can extend to a minimum of 19′ (5.8M). Powers up/down. Rear storage location. Includes portable pendant control.
Volumetric capacity of 6 cu.yd. Hydraulic dumping with top hinged full hydraulic opening rear door. Includes two 5″ (172mm) liquid level sight eyes, a steel deflector plate, a double wall strainer on the rear door drain, four mechanical rear door locks.
Two saddle tanks with a 500 gallon capacity. 3/8″ stress reinforced polyethylene and ribbed reinforced with air gap protection. Two liquid level indicators.