Showing 193–208 of 260 results
-
This is a lightweight rod carrying frame for the no. 5 rods. Normally sold in the set but here you can buy just the frame too. It can carry up to 30 rods. All steel. Allows you to keep a long distance of rods coupled up and ready to pay off to clean your lateral […]Read More -
Ratchet Turning Handles, One or Two man operation. These accessories are used for hand rodding. Using the single T11 two operators are needed and using alternating strokes. One man tool T13 lets just one man do the job. -
This new item shown in place is in a 24? corrugated pipe and slips over the pipe wall that is exposed. It has 4 ea. of 3/4? bolts that anchor it to the pipe so that it won’t move. Your hose goes right over the top and around the bottom roller. Heavy duty steel construction with Delrin rollers. Fits corrugated pipes from 18? and up. -
These Root Cutters are for 3” or 4″ pipes for the “B” Plumbers Lateral rods. The Root cutter is 6’ long also and made of ¼” spring steel. It connects right up to your “B” rods with round couplings and is an aggressive cutting tool with flat spiral steel blades with cutting edges on the […]Read More -
The flat spiral steel blade features sharp cutting edges on both the front and the back edges to cut and slice in both direction. The sharp front angles point will bore through obstructions and stoppages and the tapered cone-like shape for the tool holds roots, paper and rags tightly while pulling them back to the […]Read More
-
Root Cutter Hubs available in select sizes.Item IDs: RSH-1A 1″ Hub for Hydraulic Root Cutter STD Saw 1/8″ RSH-1B 1″ Hub for Hydraulic Root Cutter STD Saw 3/16″ RSH-58 5/8″ Hub for Hydraulic Root Cutter STD Saw -
These are the Coiled spring Wire Corkscrews for 2” or 4” pipe for the No. 5 Plumbers Lateral rods. Each of these corkscrews are 12” long also and made of ¼” spring steel. They have a very flexible coiled design that gives them great flexibility around bends and sweeps. They connect right up to your […]Read More -
3? Round Wire Corkscrew. Made from the same material as the 5/16? or 3/8? rods. Comes in sizes from 1.5? to 6?. Great for use in lines with little or no flow. -
G-3-1 3” SAND CORKSCREW USE WITH 5/16” ROD G-3-2 3” SAND CORKSCREW USE WITH 3/8” ROD -
The sand leader is designed to ride above the sand at the bottom of the manhole. It’s curved wings allow it to rotate without digging in. The front hole also serves as a cable pull hole (bucket machines) as they are designed to remove the sand mechanically. -
Sand traps have been used for years to trap the sand in the manhole before it goes downstream. Insert one end in horizontal position into the downstream line, the water will rise up over the vertical end and continue downstream but the sand will accumulate around the trap for removal.
